If the soap dispenser in your dishwasher doesn’t open, this effectively means your dishwasher isn’t working as it needs soap to be able to clean the dishes properly.
In this article, we will discuss the main components within your dishwasher that might be causing your soap dispenser to not open and how you can fix them.
Before you look into any of the components that make the dispenser work, start by giving the whole dispenser unit a good inspection to see if there are any obvious signs of it being damaged or cracked.
Try to open and close the unit to make sure it isn’t stuck. If it gets stuck, give it a good clean, and then check if this solves the problem. If it is cracked or heavily damaged, replace the whole unit as they are difficult to repair. If there are no signs of damage, you can start checking the components listed below.
The first component to check is the bi-metal actuator. This component is a metal loop that acts as a latch that allows the dispenser door to open when electricity is applied to it. When it becomes faulty, your dispenser door will not open and release any detergent or powder.
To check the bi-metal actuator, you’ll need a multimeter. Here’s how to test it:
In your soap dispenser door is a pin that holds it in place. When the pin becomes bent out of shape or faulty, it might stop the door from opening when it needs to.
Here’s how to check the door pin:
Your soap dispenser has an actuator that helps the door open. If it becomes defective, the dispenser won’t be able to work properly.
To check the dispenser actuator, you need to:
The dispenser unit has a spring in the door that helps the dispenser to open during a wash cycle so that soap can get into your dishwasher. Sometimes, the spring can become defective, which will stop your dispenser from opening.
Here’s how to check the door spring:
The next component to check is the dispenser latch. The latch is a key component within the dispenser unit that helps it to open. If defective your dishwasher won’t work properly.
To check the latch, you need to:
The next component to check is the dispenser lever. The lever helps the door to open when it needs to, and if it becomes faulty, your dishwasher won’t work correctly.
To check the dispenser lever, you need to:
In the dispenser unit is a small slide that helps the door to open and close. If it becomes damaged, the door might not be able to open, and soap won’t be able to get into your dishwasher during a wash cycle.
Checking the dispenser slide is simple, you just need to:
If your Bosch dishwasher is displaying the E15 error code, this usually indicates excess water…
An unbalanced washing machine can lead to excessive noise and vibrations, which can reverberate around…
Gas stoves are great—they work even if you experience a power outage, and they’re widely…
It can be disappointing when the ice maker stops working as it's one of those…
If your Electrolux dryer is displaying the E64 error code, it usually indicates an issue…
An ice maker is one of those extra features that people are often prepared to…
Leave a Comment